Yamaha DM1000 Owner's Manual - Page 72
Routing and EQ'ing Input Channels, ROUTING [STEREO] button, EQUALIZER [HIGH] button
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 Chapter 6-Input Channels Routing and EQ'ing Input Channels 1 Press the [SEL] button or move the fader for the channel you wish to control. 2 To route each Input Channel, use the following buttons in the SELECTED CHANNEL section: • ROUTING [1]-[8] buttons These buttons route the currently-selected Input Channel to a Bus. • ROUTING [STEREO] button............When this button is turned on, Input Channel signals are routed to the Stereo Bus. • ROUTING [DIRECT] button............When this button is turned on, the currently-selected Input Channel is routed to its Direct Out. (See page 111 for more information on Direct Out.) The corresponding button indicator lights up. 3 To control EQ for the currently-selected channel, press one of the following buttons to select the band you wish to adjust: • EQUALIZER [HIGH] button HIGH band • EQUALIZER [H-MID] button ..........HIGH-MID band • EQUALIZER [L-MID] button ...........LOW-MID band • EQUALIZER [LOW] button LOW band 4 Use the EQUALIZER [Q], [FREQUENCY], and [GAIN] controls to adjust the Q, frequency, and gain of the band selected in Step 3. See page 65 for more information on EQ. Tip: • Pressing and holding down the button selected in Step 3 resets the corresponding band parameter. • Pressing the SELECTED CHANNEL [HIGH] and [LOW] buttons simultaneously resets all band parameters for the current EQ. DM1000-Owner's Manual