Yamaha DM1000 Owner's Manual - Page 25
Power - effects
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Rear Panel 25 H WORD CLOCK IN connector This BNC connector inputs a wordclock signal from a connected external device to the DM1000. I 2TR OUT DIGITAL AES/EBU 1 This XLR-3-31-type connector outputs AES/EBU format digital audio. The connector is 2 typically used to connect the digital stereo input (AES/EBU format) of a DAT recorder, MD recorder, or CD recorder. Control Surface & Rear Panel J 2TR OUT DIGITAL COAXIAL 2 This phono connector outputs consumer format (IEC-60958) digital audio. The connector is typically used to connect the digital stereo input (consumer format) of a DAT recorder, MD recorder, or CD recorder. K 2TR IN DIGITAL AES/EBU 1 This XLR-3-32-type connector accepts AES/EBU format digital audio. The connector is typically used to connect the digital stereo output (AES/EBU format) of a DAT recorder, MD recorder, or CD recorder. L 2TR IN DIGITAL COAXIAL 2 This phono connector accepts consumer format (IEC-60958) digital audio. The connector is typically used to connect the digital stereo output (consumer format) of a DAT recorder, MD recorder, or CD recorder. Power Section 1 POWER ON OFF AC IN 23 A Grounding screw Be sure to use this screw to ground the DM1000 to protect yourself against electrical shock. The supplied power cord features a three-pin plug. If the ground terminal of the AC outlet is grounded, then the unit will be grounded sufficiently via the power cord. If the AC outlet does not provide a suitable ground, this screw must be connected to a suitable ground point. Grounding is also an effective method for eliminating hum, interference, and other noise. B POWER ON/OFF switch This switch turns the power to the DM1000 on or off. Note: To prevent loud clicks and thumps in your speakers, turn on your audio equipment in the following order (reverse this order when turning off)-sound sources, multitrack and master recorders, DM1000, monitoring power amplifiers. C AC IN connector This connector enables you to connect the DM1000 to an AC outlet via the supplied power cord. DM1000-Owner's Manual