Yamaha DM1000 Owner's Manual - Page 269
To match the parameters of both DM1000s, locate the Setup | MIDI/Host, on the copy source unit.
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Cascading Consoles 269 10 Repeat Steps 8 and 9 for the master unit so that it will be able to transmit and receive MIDI messages via the REMOTE connector. 11 To match the parameters of both DM1000s, locate the Setup | MIDI/Host page on the copy source unit. 12 Move the cursor to the TRANSMIT button for the SYNC parameter, then press [ENTER]. Data, such as libraries and Scene memories, on the copy source unit is copied onto the other DM1000 via the REMOTE connector. If you select the REQUEST button instead of the TRANSMIT button for the SYNC parameter, you can reverse the copy direction. At this point, Bus 1-8, Aux 1-4, and the Stereo Bus on both DM1000s are integrated, and the data is output via Bus Outs 1-8, Aux Outs 1-4, and the Stereo Out on the master unit. If you solo channels on one of the DM1000s, you can monitor the soloed signals via the Control Monitor. Note: You can also link the parameters using the MIDI IN and OUT connection if you set the CASCADE LINK parameter to "MIDI." 19 DM1000-Owner's Manual Other Functions