Yamaha DM1000 Owner's Manual - Page 70
Viewing the Pan, Fader, and Aux Send Level Settings, Meters, Phase DELAY
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
70 Chapter 6-Input Channels E Meters These meters indicate the signal levels of the currently-selected Input Channel and its available pair partner. F (Phase) section You can reverse the signal phase of the currently-selected Input Channel. (See page 60 for more information.) G DELAY section This section enables you to set the currently-selected channel's Delay function. (See page 61 for more information.) H PAIR section This section indicates whether or not channels are paired. The heart icon ( ) is in one piece when channels are paired. The heart icon is broken ( ) when channels are not paired. (See page 73 for more information.) ■ Viewing the Pan, Fader, and Aux Send Level Settings To display the View | Fader page of a certain Input Channel, use the corresponding [SEL] button or fader to select the desired channel, then press the DISPLAY ACCESS [VIEW] button, then the [F2] button. Move the cursor to a parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the setting. 12 3 4 5 6 A PAN/ON/Fader section • PAN control This control adjusts the currently-selected Input Channel's Pan parameter. Press the [ENTER] button to reset the Pan control to Center. • ON/OFF button This button turns on or off the currently-selected Input Channel. • Fader This parameter sets the fader position of the currently-selected Input Channel. The fader knob is highlighted when the fader is set to 0.0 dB. Press the [ENTER] button to reset the Fader to 0.0 dB. B SURROUND PAN section • SURROUND PAN ....... The Surround pan parameters for the currently-selected Input Channel are displayed only when a Surround mode is selected. See page 121 for more information on Surround pan. DM1000-Owner's Manual