Yamaha DM1000 Owner's Manual - Page 66
EQ ON, CURVE, Meters, LOW, L-MID, HIGH s, Move the cursor to the desired parameter - digital mixing console
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
66 Chapter 6-Input Channels The parameters on this page are described below: A EQ ON The ON/OFF button turns the currently-selected Input Channel's EQ on or off. You can press the [ENTER] button to turn the EQ on or off as long as the cursor is located on any parameter other than TYPE. B TYPE Selects the type of EQ. TYPE I is the EQ type used on legacy Yamaha 02R series digital mixing consoles. TYPE II is a newly developed algorithm. C ATT Determines the amount of pre-EQ signal attenuation in dB. It is the same Attenuator parameter that appears on the EQ | ATT 1-16, ATT 17-32, and ATT 33-48 pages. D CURVE This area displays the current EQ curve. E Meters These meters indicate the post-EQ signal levels of the currently-selected Input Channel and its available pair partner. F LOW, L-MID, H-MID, HIGH sections These sections contain the Q, Frequency (F), and Gain (G) parameters for the four bands. These parameter values range as follows: Parameter LOW LOW-MID HIGH-MID HIGH Q Frequency Gain HPF, 10.0 to 0.10 (41 steps), L.SHELF 10.0 to 0.10 (41 steps) LPF, 10.0 to 0.10 (41 steps), H.SHELF 21.2 Hz to 20.0 kHz (120 steps per 1/12 octave) -18.0 dB to +18.0 dB (0.1 dB steps)1 1. The LOW and HIGH GAIN controls function as filter on/off controls when Q is set to HPF or LPF respectively. Tip: • The LOW-band EQ functions as a high-pass filter when the Q parameter in the LOW section is set to HPF. It functions as a shelving-type EQ when the Q parameter is set to L.SHELF. • The HIGH-band EQ functions as a low-pass filter when the Q parameter in the HIGH sec- tion is set to LPF. It functions as a shelving-type EQ when the Q parameter is set to H.SHELF. 3 Move the cursor to the desired parameter, then rotate the Parameter wheel to change the value. Tip: • You can also press the buttons in the SELECTED CHANNEL section to select the desired band and use the rotary controls to directly edit the Q, F, and G parameters (see page 71). • You can store the EQ settings in the EQ library, which features preset programs that can be used for various applications (see page 177). DM1000-Owner's Manual