Yamaha DM1000 Owner's Manual - Page 199
Move the cursor to the desired Job button in the Job Type then press, ENTER]., ERASE
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Editing Events Offline 199 4 Move the cursor to the desired Job button in the Job Type section, then press [ENTER]. The following Jobs are available. Certain Jobs feature an extra parameter below the TIME SETTING section. ■ ERASE This button erases the specified range of Automix data. ■ COPY This button copies the specified range of Automix data to another position. When you select this button, the SOURCE and COPY TO sections appear below the TIME SETTING section. • SOURCE section This section enables you to select the copy source Automix. • COPY TO section - TIME This parameter specifies the start point to which the specified data is to be copied. (The number in parentheses on the right indicates the end point of the destination.) You can also capture the start point on-the-fly by moving the cursor to the TO button and pressing the [ENTER] button to capture the current position. To modify the captured positions, move the cursor to the value you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons. Press the [ENTER] button to reset the currently-selected digit to "00." - CH This parameter specifies the channel to which you want to copy the specified data. If multiple channels are selected as the copy source, use the CH parameter box to specify the number of the top channel in the destination. (The number in parentheses on the right indicates the number of the last channel in the destination.) For example, if eight channels are selected as the copy source and you specify "17" in the CH parameter box, the copy destination will be Channels 17 through 24. ■ MOVE/MERGE The function of this button changes depending on the SOURCE section setting. If you select CURRENT (current Automix) in the SOURCE section, this button becomes the MOVE button, which moves the specified range of Automix data to another position. If you select MEM (Automix memories 1-16) in the SOURCE section, this button becomes the MERGE button, which merges the specified range of Automix data with other Automix data. When you select this Job, the SOURCE section and MOVE TO (MERGE TO) section appear below the TIME SETTING section. Automix 16 DM1000-Owner's Manual