Yamaha DM1000 Owner's Manual - Page 315

Effects Parameters 315 COMPAND 5.1 Six input, six output compander for 5.1 surround, with individual solo for each band, and gain reduction metering of left and right (L+R), left surround and right surround (LS+RS), center (C), or LFE channels. Parameter Range Description LOW GAIN MID GAIN HI. GAIN -96.0 to +12.0 dB -96.0 to +12.0 dB -96.0 to +12.0 dB PRESENCE -10 to +10 THRE. RATIO ATTACK RELEASE -24.0 to 0.0 dB 1:1 to 20:1 0-120 ms 1 Low band level Mid band level High band level For positive values, the threshold of the high band is lowered and the threshold of the low band is increased. For negative values, the opposite will occur. When set to 0, all three bands are affected the same. Compressor threshold Compressor ratio Attack time Release time WIDTH TYPE LOOKUP KEY LINK 1-90 dB Soft, Hard 0.0-100.0 ms 2 Compressor effect range and expander effect width Compander type Lookup delay Key-in linking L-M XOVR M-H XOVR SLOPE CEILING SOLO LOW SOLO MID SOLO HIGH 21.2 Hz-8.00 kHz 21.2 Hz-8.00 kHz -6 to -12 dB -6.0 to 0.0 dB, OFF OFF, ON OFF, ON OFF, ON Low/mid crossover frequency Mid/high crossover frequency Filter slope Specifies the maximum output level If this is on, only the low-frequency band will be output. If this is on, only the mid-frequency band will be output. If this is on, only the high-frequency band will be output. 1. 6 ms-46.0 s (fs=44.1 kHz), 5 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) 2. 5.1: Key-in's of all inputs are linked 5.0: Key-in's of L, C, R, LS, and RS are linked (LFE is independent) 3+2: Key-in's of L, C, and R, and key-in's of LS and RS, are linked respectively (LFE is independent) 2+2: Key-in's of L and R, and key-in's of LS and RS, are linked respectively (C and LFE are independent) DM1000-Owner's Manual