Yamaha DM1000 Owner's Manual - Page 81
Setting the Stereo Out and Bus Out 1–8 from the Display, Attenuating the Stereo Out and Bus Out
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Setting the Stereo Out and Bus Out 1-8 from the Display 81 Setting the Stereo Out and Bus Out 1-8 from the Display To set the Stereo Out and Bus Out 1-8 parameters, you can either move the cursor to the desired parameter on the display and change the value, or operate the desired button or control on the top panel. This section explains how to set the parameters on the display. Tip: Refer to Chapter 9 "Input & Output Patching" on page 105 for more information on how to set inserts. Attenuating the Stereo Out and Bus Out To attenuate the Stereo Out and Bus Out signals, press the SELECTED CHANNEL EQUALIZER [DISPLAY] button repeatedly to display the EQ | Out Att page. On this page, you can attenuate the Bus Out 1-8, Aux Out 1-8, and Stereo Out signals. 7 Bus Outs The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except that this page does not include the bit shift parameters (see page 64). Delaying the Stereo Out and Bus Outs To delay the Stereo Out and Bus Out 1-8 signals, press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Out Dly page appears. The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except that this page does not include the MIX/FB.GAIN parameters (see page 61). Tip: You can also display the Out Dly page by pressing the [ /INSERT/DELAY] button once, then press the [SEL] button or move the fader to select the Stereo Out or Bus Out 1-8. DM1000-Owner's Manual