Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 105

Default Command Mode Usage Information Example Not configured EXEC Use this command to clear EEE counters on a specified Ethernet interface. OS10# clear counters interface 1/1/48 eee Clear eee counters on ethernet1/1/48 [confirm yes/no]:yes Supported Releases 10.3.0E or later eee Enables or disables energy-efficient Ethernet (EEE) on physical ports. Syntax eee Parameters None Default Enabled on Base-T devices and disabled on S3048-ON and S4048T-ON. Command Mode Interface Usage Information To disable EEE, use the no version of this command. Example (Enable EEE) OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# eee Example (Disable EEE) OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# no eee Supported Releases 10.3.0E or later show interface eee Displays the EEE status for all interfaces. Syntax show interface eee Parameters None Default Not configured Command Mode EXEC Example OS10# show interface eee Port EEE Status Speed Duplex Eth 1/1/1 off up 1000M ... Eth 1/1/47 on up 1000M Eth 1/1/48 on up 1000M Eth 1/1/49 n/a Eth 1/1/50 n/a Eth 1/1/51 n/a Eth 1/1/52 n/a Supported Releases 10.3.0E or later Interfaces 105