Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 309

Supported Releases 10.2.0E or later local-as Configures a local AS number for a peer. Syntax Parameters local-as as-number [no-prepend] • as-number-Enter the local AS number, from 1 to 4294967295. • no-prepend-(Optional) Enter so that local AS values are not prepended to announcements from the neighbor. Default Disabled Command Mode ROUTER-NEIGHBOR or ROUTER-TEMPLATE Usage Information Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of this command resets the value to the default. Example (Neighbor) OS10(conf-router-bgp-10)# neighbor lunar OS10(conf-router-neighbor)# local-as 20 Example (Template) OS10(conf-router-bgp-10)# template solar OS10(conf-router-template)# local-as 20 Supported Releases 10.3.0E or later log-neighbor-changes Enables logging for changes in neighbor status. Syntax Parameters Default Command Mode Usage Information Example log-neighbor-changes None Enabled ROUTER-BGP OS10 saves logs which includes the neighbor operational status and reset reasons. To view the logs, use the show bgp config command. The no version of this command disables the feature. OS10(conf-router-bgp-10)# log-neighbor-changes Supported Releases 10.3.0E or later maximum-paths Configures the maximum number of equal-cost paths for load sharing. Syntax maximum-paths [ebgp number | ibgp number] maxpaths Parameters • ebgp-Enable multipath support for external BGP routes. • ibgp-Enable multipath support for internal BGP routes. Layer 3 309