Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 142

Parameters Default Command Mode Usage Information Example interface-type - (Optional) Enter the interface type. The interface may be ethernet, VLAN, or port-channel. Not configured EXEC If you do not specify the interface interface-type information, then the command clears the statistics for all the interfaces and VLANs. OS10# clear fcoe statistics interface ethernet 1/1/1 OS10# clear fcoe statistics interface port-channel 5 Supported Releases 10.4.0E(R1) or later fc alias Creates an FC alias. After creating the alias, you can add members to the FC alias. Syntax Parameters Defaults Command Mode Usage Information fc alias alias-name alias-name - Enter a name for the FC alias. Not configured CONFIGURATION The no version of this command deletes the FC alias. To delete an FC alias, first remove it from the FC zone. Example OS10(config)# fc alias test OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9 OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57 Supported Releases 10.3.1E or later fc zone Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 527 unique members. Syntax fc zone zone-name Parameters zone-name - Enter a name for the zone. Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes the FC zone. To delete an FC zone, first remove it from the FC zoneset. Example OS10(config)# fc zone hba1 OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19 OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8 Supported Releases 10.3.1E or later 142 Fibre channel