Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 469

year-month-day Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Default Command Mode Usage Information Example Not configured EXEC Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardwarebased real-clock time (RTC) resets to the new time. The new system clock setting is applied immediately. OS10# clock set 18:30:10 2017-01-25 Supported Releases 10.2.1E or later clock timezone Sets the time zone used for the system clock. Syntax clock timezone timezone-string Hours Minutes Parameters • Enter timezone-string which is the name of the time zone. • Enter Hours offset from UTC, ranging from -23 to 23. • Enter Minutes offset from UTC, ranging from 0 to 59. Default Command Mode Usage Information Example Not configured CONFIGURATION Universal time coordinated (UTC) is the time standard based on Greenwich Mean time. To set the time zone for the system clock, enter the difference of hours between UTC and your time zone. OS10(config)# clock timezone IST 5 30 Supported Releases 10.3.0E or later show clock Displays the current system clock settings. Syntax Parameters Default Command Mode Usage Information Example show clock None Not configured EXEC The universal time coordinated (UTC) value is the number of hours that your time zone is later or earlier than UTC/ Greenwich mean time. OS10# show clock 2017-01-25T11:00:31.68-08:00 Supported Releases 10.2.1E or later System management 469