Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 373

Parameters Default Command Mode Usage Information Example number - Enter a default-metric value (1 to 16777214). Not configured ROUTER-OSPF The no version of this command disables the default-metric configuration. OS10(conf-router-ospf-10)# default-metric 2000 Supported Releases 10.2.0E or later fast-converge Sets the minimum LSA origination and arrival times to zero (0) allowing more rapid route computation so that convergence takes less time. Syntax Parameters Default Command Mode Usage Information Example fast-converge convergence-level convergence-level - Enter a desired convergence level value (1 to 4). Not configured ROUTER-OSPF Convergence level 1 (optimal) meets most convergence requirements. Only select higher convergence levels following consultation with Dell Technical Support. The no version of this command disables the fast-convergence configuration. OS10(conf-router-ospf-10)# fast-converge 3 Supported Releases 10.2.0E or later graceful-restart Enables the helper mode during a graceful or hitless restart. Syntax graceful-restart role helper-only Parameters None Defaults Disabled Command Mode ROUTER-OSPF Usage Information The no version of this command disables the helper mode. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# graceful-restart role helper-only Supported Releases 10.3.0E or later ip ospf area Attaches an interface to an OSPF area. Syntax Parameters ip ospf process-id area area-id • process-id - Set an OSPF process ID for a specific OSPF process (1 to 65535) Layer 3 373