Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 478

To display information about user logins, enter the show login-statistics command. Enable login statistics OS10(config)# login-statistics enable To disable login statistics, enter the no login-statistics enable command. Security commands aaa authentication Configures the AAA authentication method for user access. Syntax aaa authentication {local | radius | tacacs} Parameters • local - Use local (RBAC) access control. • radius - Use the RADIUS servers configured with the radius-server host command. • tacacs - Use the TACACS+ servers configured with the tacacs-server host command. Default Command Mode Usage Information Example Local authentication CONFIGURATION There is no no version of this command. To reset the authentication method to local, enter the aaa authentication local command. OS10(config)# aaa authentication radius Supported Releases 10.2.0E or later aaa re-authenticate enable Requires user re-authentication after a change in the authentication method or server. Syntax Parameters Default Command Mode Usage Information aaa re-authenticate enable None Disabled EXEC • After you enable user re-authentication and change the authentication method or server, users are logged out of the switch and are prompted to log in again to re-authenticate. User re-authentication is triggered by: - Adding or removing a RADIUS server as a configured server host (radius-server host command) - Adding or removing an authentication method (aaa authentication [local | radius] command) • The no version of the command disables user re-authentication. Example OS10(config)# aaa re-authenticate enable Supported Releases 10.4.0E(R1) or later 478 System management