Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 302

Command Mode Usage Information Example ROUTER-BGP To enable load-balancing across different EBGP peers, configure the mutlipath-relax option. If you configure both ignore or multipath-relax options at the same time, a system-generated error message appears. The no version of this command disables configuration. OS10(conf-router-bgp-10)# bestpath as-path multipath-relax Supported Releases 10.3.0E or later bestpath med Changes the best path MED attributes during MED comparison for path selection. Syntax Parameters bestpath med {confed | missing-as-worst} • confed - Compare MED among BGP confederation paths. • missing-as-worst - Treat missing MED as the least preferred path. Default Command Mode Usage Information Example Disabled ROUTER-BGP Before you apply this command, use the always-compare-med command. The no version of this command resets the MED comparison influence. OS10(conf-router-bgp-2)# bestpath med confed Supported Releases 10.3.0E or later bestpath router-id Ignores comparing router-id information for external paths during the best path selection. Syntax bestpath router-id {ignore} Parameters ignore - Enter to ignore AS path for best-path computation. Default Enabled Command Mode ROUTER-BGP Usage Information Select the path that you received first if you do not receive the same the router ID for multiple paths. Ignore the path information if you received the same router ID for multiple paths. The no version of this command resets the value to the default. Example OS10(conf-router-bgp-2)# bestpath router-id ignore Supported Releases 10.3.0E or later clear ip bgp Resets BGP IPv4 or IPv6 neighbor sessions. Syntax clear ip bgp {ipv4-address | ipv6-address | * } 302 Layer 3