Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 682

sflow enable Enables sFlow on a specific interface or globally on all interfaces. Syntax sflow enable [all-interfaces] Parameters all-interfaces - (Optional) Enter to enable sFlow globally. Default Disabled Command Mode CONFIGURATION Usage Information The no version of this command to disables sFlow. Example (interface) OS10(config)# sflow enable OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# sflow enable Example (interface range) OS10(config)# sflow enable OS10(config)# interface range ethernet 1/1/1-1/1/10 OS10(conf-range-eth1/1/1-1/1/10)# sflow enable Example (portchannel) OS10(config)# sflow enable OS10(config)# interface range port-channel 1-10 OS10(conf-range-po-1-10)# sflow enable Supported Releases 10.3.0E or later sflow max-header-size Sets the maximum header size of a packet. Syntax sflow max-header-size header-size Parameter header-size - Enter the header size in bytes, from 64 to 256. The default is 128. Default 128 bytes Command Mode CONFIGURATION Usage Information Example Use the no version of the command to reset the header size to the default value. OS10(conf)# sflow max-header-size 256 Supported Releases 10.3.0E or later sflow polling-interval Sets the sFlow polling interval. Syntax Parameter sflow polling-interval interval-value interval-value - Enter the interval value in sections, from 10 to 300. The default is 30. 682 sFlow