Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 453

ip host dell-f10.com 10.10.10.10 snmp-server community public read-only snmp-server contact http://www.dell.com/support/ snmp-server location United States debug radius false DHCP commands default-router address Assigns a default gateway to clients based on the IP address pool. Syntax Parameters default-router address [address2...address8] • address - Enter an IPv4 or IPv6 address to use as the default gateway for clients on the subnet in A.B.C.D or A::B format. • address2...address8 - (Optional) Enter up to eight IP addresses, in order of preference. Default Command Mode Usage Information Example Not configured DHCP-POOL Configure up to eight IP addresses, in order of preference. Use the no version of this command to remove the configuration. OS10(conf-dhcp-20.1.1.1)# default-router 20.1.1.100 Supported Releases 10.2.0E or later disable Disables the DHCP server. Syntax Parameters Default Command Mode Usage Information Example disable None Disabled DHCP The no version of this command enables the DHCP server. OS10(conf-dhcp)# no disable Supported Releases 10.2.0E or later dns-server address Assigns a DNS server to clients based on the address pool. Syntax dns-server address [address2...address8] Parameters • address - Enter the DNS server IP address that services clients on the subnet in A.B.C.D or A::B format. System management 453