Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 110

23 Active 24 Inactive 25 Inactive 26 Inactive 27 Inactive 28 Inactive 29 Inactive 30 Inactive Interface commands A Eth1/1/2 channel-group Assigns an interface to a port-channel group. Syntax channel-group channel-number mode {active | on | passive} Parameters • channel-number - Enter a port-channel number (1 to 128). • mode - Sets the LACP actor mode. • active - Sets channeling mode to active. • on - Sets channeling mode to static. • passive - Sets channeling mode to passive. Default Command Mode Usage Information Example Not configured INTERFACE The no version of this command resets the value to the default, and unassigns the interface from the port-channel group. OS10(config)# interface ethernet 1/1/2:1 OS10(conf-if-eth1/1/2:1)# channel-group 20 mode active Supported Releases 10.3.0E or later default interface Resets an Ethernet or Fibre Channel interface to its default settings. Syntax Parameters default interface interface-type interface-type - Enter the interface type: • ethernet node/slot/port[:subport] - Resets an Ethernet interface to its default settings. • fibrechannel node/slot/port[:subport] - Resets a Fibre Channel interface to its default settings. • range ethernet node/slot/port:[subport]-node/slot/port[:subport] - Resets a range of Ethernet interfaces to their default settings. Default Command mode Not configured CONFIGURATION 110 Interfaces