Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 468

System clock OS10 uses the network time protocol (NTP) to synchronize the system clock with a time-serving host. If you do not use NTP, set the system time and the timezone. The hardware-based real-clock time (RTC) is reset to the new system time. You can set the current time and date after you disable NTP. When you enable NTP, it overwrites the system time. • Enter the time and date in EXEC mode. clock set time year-month-day Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. • Enter the timezone in CONFIGURATION mode. clock timezone timezone-string Hours Minutes Enter timezone-string which is the name of the time zone. Enter Hours offset from UTC, ranging from -23 to 23. Enter Minutes offset from UTC, ranging from 0 to 59. Set time and date OS10# clock set 13:00:00 2018-08-30 View system time and date OS10# show clock 2018-08-30T13:01:01.45+00:00 Set time zone OS10(config)# clock timezone IST 5 30 View system time and date with time zone configured OS10# show clock 2018-08-30T13:01:01.57+05:30 System Clock commands clock set Sets the system time. Syntax clock set time year-month-day Parameters time Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. 468 System management