Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 329

• A.B.C.D/mask -Specify the IP route to be removed from the IP routing table. This option refreshes all the routes in the routing table, but the traffic flow is affected only for the specified route in the switch. Default Command Mode Usage Information Example Not configured EXEC This command does not remove the static routes from the routing table. OS10# clear ipv6 route 10.1.1.0/24 Supported Releases 10.3.0E or later ip address Configures IP address to an interface. Syntax Parameters Defaults Command Mode Usage Information Example ip address ip-address/mask ip-address/mask - Enter the IP address. None INTERFACE The no version of this command removes the IP address set for the interface. OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# ip address 10.1.1.0/24 Supported Releases 10.3.0E or later ip address dhcp Enables DHCP client operations on the interface. Syntax Parameters Defaults Command Mode Usage Information Example ip address dhcp None None INTERFACE The no version of this command disables the DHCP operations on the interface. OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)# ip address dhcp Supported Releases 10.3.0E or later ip arp Configures static ARP and maps the IP address of the neighbor to a MAC address. Syntax ip arp mac-address Parameters mac-address - Enter the MAC address of IP neighbor in A.B.C.D format. Layer 3 329