Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 195

clear lldp counters Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all the physical interfaces. Syntax Parameters Default Command Mode Usage Information Example clear lldp counters None Not configured EXEC The counter default value resets to zero for all physical interfaces. OS10# clear lldp counters Supported Releases 10.2.0E or later clear lldp table Clears LLDP neighbor information for all interfaces. Syntax clear lldp table Parameters None Default Not configured Command Mode EXEC Usage Information Neighbor information clears on all interfaces. Example OS10# clear lldp table Supported Releases 10.2.0E or later lldp enable Enables or disables LLDP globally. Syntax lldp enable Parameters None Default Enabled Command Mode CONFIGURATION Usage Information This command enables LLDP globally for all Ethernet (PHY) interfaces, except on those interfaces where LLDP is manually disabled. The no version of this command disables LLDP globally irrespective of whether LLDP is manually enabled on an interface. Example OS10(config)# lldp enable Supported Releases 10.3.1E or later Layer 2 195