Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 378

Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# log-adjacency-changes Supported Releases 10.2.0E or later max-metric router-lsa Configures OSPF to advertise a maximum metric on a router so that it is not desired as an intermediate hop from other routers. Syntax max-metric router-lsa Parameters None Default Not configured Command Mode ROUTER-OSPF Usage Information Routers in the network do not prefer other routers as the next intermediate hop after they calculate the shortest path. The no version of this command disables maximum metric advertisement configuration. Example OS10(conf-router-ospf-10)# max-metric router-lsa Supported Releases 10.2.0E or later maximum-paths Enables forwarding of packets over multiple paths. Syntax Parameters Default Command Mode Usage Information Example maximum-paths number number -Enter the number of paths for OSPF (1 to 128). 64 ROUTER-OSPF The no version of this command resets the value to the default. OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# maximum-paths 1 Supported Releases 10.2.0E or later redistribute Redistributes information from another routing protocol or routing instance to the OSPFv2 process. Syntax Parameters redistribute {bgp as-number| connected | static} [route-map map-name] • as-number - Enter an autonomous number to redistribute BGP routing information throughout the OSPF instance (1 to 4294967295). • connected - Enter the information from connected (active) routes on interfaces to redistribute. • static - Enter the information from static routes on interfaces redistribute. • route-map name - Enter the name of a configured route-map. Defaults Command Mode Not configured ROUTER-OSPF 378 Layer 3