Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 486

• key authentication-key - (Optional) Enter the authentication key used to authenticate the switch on the server (up to 42 characters; default radius_secure). Default Command Mode Usage Information Example Not configured CONFIGURATION The authentication key must match the key configured on the RADIUS server. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers by using the radius-server retransmit and radius-server timeout commands. The no version of this command removes a RADIUS server configuration. OS10(config)# radius-server host 1.5.6.4 key secret1 Supported Releases 10.2.0E or later radius-server retransmit Configures the number of authentication attempts allowed on RADIUS servers. Syntax Parameters Default Command Mode Usage Information Example radius-server retransmit retries retries - Enter the number of retry attempts (0 to 100). An OS10 switch retransmits a RADIUS authentication request three times. CONFIGURATION Use this command to globally configure the number of retransmit attempts allowed for authentication requests on RADIUS servers. The no version of this command resets the value to the default. OS10(config)# radius-server retransmit 50 Supported Releases 10.2.0E or later radius-server timeout Configures the timeout used to resend RADIUS authentication requests. Syntax radius-server timeout seconds Parameters seconds - Enter the time in seconds for retransmission (0 to 1000). Default An OS10 switch stops sending RADIUS authentication requests after five seconds. Command Mode CONFIGURATION Usage Information Use this command to globally configure the timeout value used on RADIUS servers. The no version of this command resets the value to the default. Example OS10(config)# radius-server timeout 360 Supported Releases 10.2.0E or later 486 System management