Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 170

dot1x timeout supp-timeout Sets the number of seconds that the device waits for the supplicant to respond to an EAP request frame before the device retransmits the frame. Syntax Parameters Default Command Mode Usage Information Example dot1x timeout supp-timeout seconds supp-timeout seconds - Enter the number of seconds for the 802.1X supplicant timeout (1 to 65535). 30 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout supp-timeout 45 Supported Releases 10.2.0E or later dot1x timeout tx-period Sets the number of seconds that the device waits for a response to an EAP-request/identity frame from the supplicant before retransmitting the request. Syntax Parameters Default Command Mode Usage Information Example dot1x timeout tx-period seconds tx-period seconds - Enter the number of seconds for the 802.1X transmission timeout (1 to 65535). 60 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout tx-period 120 Supported Releases 10.2.0E or later show dot1x Displays global 802.1X configuration information. Syntax Parameters Default Command Mode Usage Information Example show dot1x None Not configured EXEC None OS10# show dot1x PAE Capability: Protocol Version: System Auth Control: Auth Server: Authenticator only 2 Enable Radius Supported Releases 10.2.0E or later 170 Layer 2