Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 582
Assign service-policy, a name for the service policy in CONTROL-PLANE mode.
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 582 highlights
3 Create an input policy-map to assign the QoS policy to the desired service queues in CONFIGURATION mode. policy-map type control-plane policy-map-name 4 Associate a policy-map with a class-map in POLICY-MAP mode. class class-name 5 Configure marking for a specific queue number in POLICY-MAP-CLASS-MAP mode (0 to 11). set qos-group queue-number 6 Configure rate policing on incoming traffic in POLICY-MAP-CLASS-MAP mode. police {cir committed-rate | pir peak-rate} • cir committed-rate-Enter a committed rate value in pps (0 to 4000000). • pir peak rate - Enter a peak-rate value in pps (0 to 40000000). Create QoS policy for CoPP OS10(config)# class-map type control-plane copp OS10(conf-cmap-control-plane)# exit OS10(config)# policy-map type control-plane copp1 OS10(conf-pmap-control-plane)# class copp OS10(conf-pmap-c)# set qos-group 2 OS10(conf-pmap-c)# police cir 100 pir 100 View policy-map OS10(conf-pmap-c)# do show policy-map Service-policy(control-plane) input: copp1 Class-map (control-plane): copp set qos-group 2 police cir 100 bc 100 pir 100 be 100 Assign service-policy Rate controlling control traffic towards CPU requires configuring control-plane type policy. To enable CoPP, you need to apply the defined policy-map to CONTROL-PLANE mode. 1 Enter CONTROL-PLANE mode from CONFIGURATION mode. control-plane 2 Define a service-policy of type input and configure a name for the service policy in CONTROL-PLANE mode. service-policy input service-policy-name Assign control-plane service-policy OS10(config)# control-plane OS10(conf-control-plane)# service-policy input copp1 View control-plane service-policy OS10(conf-control-plane)# do show qos control-plane Service-policy (input): copp1 View configuration Use the show commands to display the protocol traffic assigned to each control-plane queue and the current rate-limit applied to each queue. You can also use the show command output to verify the CoPP configuration. View CoPP configuration OS10# show qos control-plane Service-policy (input): pmap1 582 Quality of service