Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 267

description (Port Monitoring) Configures a description for the port monitoring session. The monitoring session can be one of the following: local, RPM, or ERPM. Syntax Parameters Default Command Mode Usage Information Example description string string - Enter a description of the monitoring session (up to 255 characters). Not configured MONITOR-SESSION The no version of this command removes the description text. OS10(conf-mon-local-1)# description remote OS10(conf-mon-rspan-source-5)# description "RSPAN Sesssion" OS10(conf-mon-erpm-source-10)# description "ERPM Session" Supported Releases 10.2.0E or later destination (Port Monitoring) Sets the destination where monitored traffic is sent to. The monitoring session can be local or RPM. Syntax Parameters destination {interface interface-type | remote-vlan vlan-id} interface-type - Enter the interface type for a local monitoring session. • ethernet node/slot/port[:subport] - Enter the Ethernet interface information as the destination. • port-channel id-number - Enter a port-channel number as the destination (1 to 128). • vlan vlan-id -Enter a VLAN ID as the destination (1 to 4093). Default Command Mode Usage Information Example remote-vlan vlan-id-Enter a remote VLAN ID as the destination for RPM monitoring session (1 to 4093). Not configured MONITOR-SESSION The no version of this command resets the value to the default. OS10(conf-mon-local-10)# destination interface port-channel 10 OS10(conf-mon-rspan-source-3)# destination remote-vlan 20 Supported Releases 10.2.0E or later flow-based Enables flow-based monitoring. The monitoring session can be one of the following: local, RPM, or ERPM. Syntax Parameters Default Command Mode flow-based enable None Disabled MONITOR-SESSION Layer 2 267