Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 364

router ospf 100 ... Assign router identifier For managing and troubleshooting purposes, you can assign a router ID for the OSPFv2 process. Use the router's IP address as the router ID. • Assign the router ID for the OSPFv2 process in ROUTER-OSPF mode router-id ip-address Assign router ID OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# router-id 10.10.1.5 View OSPFv2 status OS10# show ip ospf 10 Routing Process ospf 10 with ID 10.10.1.5 Supports only single TOS (TOS0) routes It is an Autonomous System Boundary Router It is Flooding according to RFC 2328 Convergence Level 0 Min LSA origination 0 msec, Min LSA arrival 1000 msec Min LSA hold time 5000 msec, Max LSA wait time 5000 msec Number of area in this router is 1, normal 1 stub 0 nssa 0 Area (0.0.0.0) Number of interface in this area is 3 SPF algorithm executed 38 times Area ranges are Stub areas Type 5 LSAs are not flooded into stub areas. The ABR advertises a default route into the stub area to which it is attached. Stub area routers use the default route to reach external destinations. 1 Enable OSPF routing and enter ROUTER-OSPF mode, from 1 to 65535. router ospf instance number 2 Configure an area as a stub area in ROUTER-OSPF mode. area area-id stub [no-summary] • area-id-Enter the OSPF area ID as an IP address (A.B.C.D) or number, from 1 to 65535. • no-summary-(Optional) Enter to prevent an ABR from sending summary LSA to the stub area. Configure stub area OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# area 10.10.5.1 stub View stub area configuration OS10# show ip ospf Routing Process ospf 10 with ID 130.6.196.14 Supports only single TOS (TOS0) routes It is Flooding according to RFC 2328 SPF schedule delay 1000 msecs, Hold time between two SPFs 10000 msecs Convergence Level 0 Min LSA origination 0 msec, Min LSA arrival 1000 msec Min LSA hold time 5000 msec, Max LSA wait time 5000 msec Number of area in this router is 1, normal 0 stub 1 nssa 0 Area (10.10.5.1) Number of interface in this area is 0 364 Layer 3