Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 605

Usage Information Example If the trust map does not define traffic class values to a queue, those flows are mapped to the default queue (0). If some of the traffic class values are already mapped to an existing queue, you will receive an error. The no version of this command returns the value to the default. OS10(conf-tmap-tc-queue-qos)# queue 2 qos-group 5 Supported Releases 10.3.0E or later random-detect (interface) Assigns a WRED profile to the specified interface. Syntax random-detect wred-profile Parameters wred-profile - Enter the name of an existing WRED profile. Default Not configured Command Mode INTERFACE Usage Information The no version of this command removes the WRED profile from the interface. Example OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# random-detect test_wred Supported Releases 10.4.0E(R1) or later random-detect (queue) Assigns a WRED profile to the specified queue. Syntax Parameters Default Command Mode Usage Information Example random-detect wred-profile-name wred-profile-name - Enter the name of an existing WRED profile. Not configured PMAP-C-QUE The no version of this command removes the WRED profile from the queue. OS10(config)# policy-map type queuing p1 OS10(config-pmap-queuing)# class c1 OS10(config-pmap-c-que)# random-detect test_wred Supported Releases 10.4.0E(R1) or later random-detect color Configures the threshold of WRED profile for available colors. Syntax random-detect color color-name minimum-threshold minimum-value maximumthreshold maximum-value drop-probability drop-rate Parameters • color-name - Enter the color of drop precedence for the WRED profile. The available options are: green, yellow, and red. Quality of service 605