Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 450
Hostname resolution, Enable DHCP server, NetBIOS WINS address resolution
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
2 Create an IP address pool and provide a name in DHCP mode. pool name 3 Enter the default gateway(s) for the clients on the subnet in order of preference in DHCP mode. default-router address Change default gateway name OS10(config)# ip dhcp server OS10(conf-dhcp)# pool Dell OS10(conf-dhcp-Dell)# default-router 20.1.1.1 Enable DHCP server Use the ip dhcp server command to enable DHCP server-assigned dynamic addresses on an interface in CONFIGURATION mode. The DHCP server is disabled by default. OS10(config)# ip dhcp server OS10(conf-dhcp)# no disable Hostname resolution You have two choices for hostname resolution - domain name server (DNS) or NetBIOS Windows internet naming service (WINS). Both DHCP and WINS clients query IP servers to compare host names to IP addresses. 1 Enable DHCP server-assigned dynamic addresses on an interface in DHCP mode. ip dhcp server 2 Create in IP address pool and enter the name in DHCP mode. pool name 3 Create a domain and enter the domain name in DHCP mode. domain-name name 4 Enter the DNS servers in order of preference that are available to a DHCP client in DHCP mode. dns-server address DNS address resolution OS10(config)# ip dhcp server OS10(conf-dhcp)# pool Dell OS10(conf-dhcp-Dell)# domain-name dell.com OS10(conf-dhcp-Dell)# dns-server 192.168.1.1 NetBIOS WINS address resolution DHCP clients can be one of four types of NetBIOS nodes - broadcast, peer-to-peer, mixed, or hybrid. Dell EMC recommends using hybrid as the NetBIOS node type. 1 Enable DHCP server-assigned dynamic addresses on an interface in DHCP mode. ip dhcp server 2 Create an IP address pool and enter the pool name in DHCP mode. pool name 3 Enter the NetBIOS WINS name servers in order of preference that are available to DHCP clients in DHCP mode. netbios-name-server ip-address 4 Enter the keyword Hybrid as the NetBIOS node type in DHCP mode. netbios-node-type type 450 System management