Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 198

Command Mode Usage Information Example INTERFACE Attach only one network policy for per interface. OS10(conf-if-eth1/1/5)# lldp med network-policy add 1 Supported Release 10.2.0E or later lldp med tlv-select Configures the LLDP-MED TLV type to transmit or receive. Syntax lldp med tlv-select {network-policy | inventory} Parameters • network-policy - Enable or disable the port description TLV. • inventory - Enable or disable the system TLV. Default Command Mode Usage Information Example Enabled INTERFACE None OS10(conf-if-eth1/1/3)# lldp med tlv-select network-policy Supported Releases 10.2.0E or later lldp receive Enables or disables the LLDP packet reception on a specific interface. Syntax Parameters Default Command Mode Usage Information Example lldp receive None Not configured INTERFACE Enable LLDP globally on the system before using the lldp receive command. The no version of this command disables the reception of LLDP packets. OS10(conf-if-eth1/1/3)# lldp receive Supported Releases 10.2.0E or later lldp reinit Configures the delay time (in seconds) for LLDP to initialize on any interface. Syntax lldp reinit seconds Parameters seconds - Enter the delay timer value in seconds (1 to 10). Default 2 seconds Command Mode CONFIGURATION 198 Layer 2