Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 627
VLTi configuration, Con VLT port-channel, configuration, Configure
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 627 highlights
1 Configure a VLT domain and enter VLT-DOMAIN mode. Configure the same VLT domain ID on each peer, from 1 to 255. vlt-domain domain-id 2 Repeat the steps on the VLT peer to create the VLT domain. Peer 1 OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# Peer 2 OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# VLTi configuration Before you configure VLTi on peer interfaces, remove each interface from L2 mode with the no switchport command, see VLT interconnect. 1 Enter the VLT domain ID to enter from CONFIGURATION mode. vlt-domain domain-id 2 Configure one or a hyphen-separated range of VLT peer interfaces to become a member of the VLTi in INTERFACE mode. discovery-interface {ethernet node/slot/port[:subport] | ethernet node/slot/port[:subport] node/slot/port[:subport]} 3 Repeat the steps on the VLT peer. Peer 1 OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# no switchport OS10(conf-if-eth1/1/1)# exit OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# no switchport OS10(conf-if-eth1/1/2)# exit OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/2 Peer 2 OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# no switchport OS10(conf-if-eth1/1/1)# exit OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# no switchport OS10(conf-if-eth1/1/2)# exit OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/2 Configure VLT port-channel A VLT port-channel links an attached device and VLT peer switches, also known as a virtual link trunk. 1 Enter the port-channel ID number on the VLT peer in INTERFACE mode, from 1 to 1024. interface port-channel id-number 2 Assign the same ID to a VLT port-channel on each VLT peer - peers are seen as a single VLT LAG to downstream devices. vlt-port-channel vlt-lag-id 3 Repeat the steps on the VLT peer. Virtual link trunking 627