Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 217
Enable STP BPDU guard in INTERFACE mode., To clear Error Disabled state
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
To clear Error Disabled state: • Use the shutdown command on the interface. • Use the spanning-tree bpdufilter disable command to disable the BPDU guard on the interface. • Use the spanning-tree disable command to disable STP on the interface. 2 Enable STP BPDU guard in INTERFACE mode. spanning-tree bpduguard enable • To shut down the port channel interface, all member ports are disabled in the hardware. • To add a physical port to a port-channel already in the Error Disable state, the new member port is also disabled in the hardware. • To remove a physical port from a port-channel in Error Disable state, the Error Disabled state clears on this physical port (the physical port is enabled in the hardware). To clear Error Disabled state: • Use the shutdown command on the interface. • Use the spanning-tree bpduguard disable command to disable the BPDU guard on the interface. • Use the spanning-tree disable command to disable STP on the interface. 3 Set the guard types to avoid loops in INTERFACE mode. spanning-tree guard {loop | root | none} • loop - Set the guard type to loop. • none - Set the guard type to none. • root - Set the guard type to root. BPDU filter OS10(conf-if-eth1/1/4)# spanning-tree bpdufilter enable OS10(conf-if-eth1/1/4)# do show spanning-tree interface ethernet 1/1/4 ethernet1/1/4 of vlan1 is designated Blocking Edge port:no (default) port guard :none (default) Link type is point-to-point (auto) Boundary: NO bpdu filter : Enable bpdu guard : bpduguard shutdown-on- violation :disable RootGuard: enable LoopGuard disable Bpdus (MRecords) sent 134, received 138 Interface Designated Name PortID Prio Cost Sts Cost Bridge ID PortID ethernet1/1/4 128.272 128 500 BLK 500 32769 90b1.1cf4.a911 128.272 BPDU guard OS10(config)# interface ethernet 1/1/4 OS10(conf-if-eth1/1/4)# spanning-tree bpduguard enable OS10(conf-if-eth1/1/4)# do show spanning-tree interface ethernet 1/1/4 ethernet1/1/4 of vlan1 is designated Blocking Edge port:no (default) port guard :none (default) Link type is point-to-point (auto) Boundary: NO bpdu filter : Enable bpdu guard : bpduguard shutdown-on- violation :enable RootGuard: enable LoopGuard disable Bpdus (MRecords) sent 134, received 138 Interface Designated Name PortID Prio Cost Sts Cost Bridge ID PortID ethernet1/1/4 128.272 128 500 BLK 500 32769 90b1.1cf4.a911 128.272 Loop guard OS10(config)# interface ethernet 1/1/4 OS10(conf-if-eth1/1/4)# spanning-tree guard loop OS10(conf-if-eth1/1/4)# do show spanning-tree interface ethernet 1/1/4 ethernet1/1/4 of vlan1 is root Forwarding Edge port:no (default) port guard :none (default) Link type is point-to-point (auto) Layer 2 217