Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 631
Configure, configuration, Add members to port channel 20
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 631 highlights
• Configure VLT port channel for VLAN 100: D1(config)# interface port-channel 10 D1(conf-if-po-10)# vlt-port-channel 10 D1(conf-if-po-10)# switchport mode trunk D1(conf-if-po-10)# switchport trunk allowed vlan 100 D1(conf-if-po-10)# exit • Add members to port channel 10: D1(config)# interface ethernet 1/1/3 D1(conf-if-eth1/1/3)# channel-group 10 D1(conf-if-eth1/1/3)# exit D1(config)# interface ethernet 1/1/4 D1(conf-if-eth1/1/4)# channel-group 10 D1(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: D1(config)# router ospf 100 D1(conf-router-ospf-100)# exit D1(config)# interface vlan 200 D1(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: D1(config)# interface port-channel 20 D1(conf-if-po-20)# vlt-port-channel 20 D1(conf-if-po-20)# switchport mode trunk D1(conf-if-po-20)# switchport trunk allowed vlan 200 D1(conf-if-po-20)# exit • Add members to port channel 20: D1(config)# interface ethernet 1/1/5 D1(conf-if-eth1/1/5)# channel-group 20 D1(conf-if-eth1/1/5)# exit D1(config)# interface ethernet 1/1/6 D1(conf-if-eth1/1/6)# channel-group 20 D1(conf-if-eth1/1/6)# exit Sample configuration of C2: • Configure VRRP on L2 links between core routers: C2(config)# interface vlan 100 C2(conf-if-vl-100)# ip address 10.10.100.3/24 C2(conf-if-vl-100)# vrrp-group 10 C2(conf-vlan100-vrid-10)# virtual-address 10.10.100.5 • Configure VLT port channel for VLAN 100: C2(config)# interface port-channel 10 C2(conf-if-po-10)# vlt-port-channel 10 C2(conf-if-po-10)# switchport mode trunk C2(conf-if-po-10)# switchport trunk allowed vlan 100 C2(conf-if-po-10)# exit • Add members to port channel 10: C2(config)# interface ethernet 1/1/3 C2(conf-if-eth1/1/3)# channel-group 10 C2(conf-if-eth1/1/3)# exit C2(config)# interface ethernet 1/1/4 C2(conf-if-eth1/1/4)# channel-group 10 C2(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: C2(config)# router ospf 100 C2(conf-router-ospf-100)# exit C2(config)# interface vlan 200 C2(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: C2(config)# interface port-channel 20 C2(conf-if-po-20)# vlt-port-channel 20 C2(conf-if-po-20)# switchport mode trunk Virtual link trunking 631