Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 290

neighbor 17.1.1.2 remote-as 102 no shutdown ! address-family ipv4 unicast allowas-in 4 Show IP BGP OS10(config)# router bgp 100 OS10(config-router-bgp-100)# neighbor 172:16:1::2 OS10(config-router-neighbor)# remote-as 100 OS10(config-router-neighbor)# no shutdown OS10(config-router-neighbor)# address-family ipv6 unicast OS10(config-router-bgp-neighbor-af)# activate OS10(config-router-bgp-neighbor-af)# allowas-in 1 OS10(config-router-bgp-neighbor-af)# end OS10# show running-configuration bgp ! router bgp 100 ! neighbor 172:16:1::2 remote-as 100 no shutdown ! address-family ipv6 unicast activate allowas-in 1 OS10# show ip bgp BGP local RIB : Routes to be Added , Replaced , Withdrawn BGP local router ID is 100.1.1.1 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed/network, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *>I 55::/64 172:16:1::2 0 0 0 100 200 300 400 i *>I 55:0:0:1::/64 172:16:1::2 0 0 0 100 200 300 400 i *>I 55:0:0:2::/64 172:16:1::2 0 0 0 100 200 300 400 i Redistribute routes Add routes from other routing instances or protocols to the BGP process. You can include OSPF, static, or directly connected routes in the BGP process with the redistribute command. • Include directly connected or user-configured (static) routes in ROUTER-BGP-AF mode. redistribute {connected | static} • Include specific OSPF routes in IS-IS in ROUTER-BGP-AF mode (1 to 65535). redistribute ospf process-id Disable redistributed routes OS10(conf-router-bgp-af)# no redistribute ospf route-map ospf-to-bgp Enable redistributed routes OS10(conf-router-bgp-af)# redistribute ospf Additional paths The add-path command is disabled by default. 290 Layer 3