Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 485
password-attributes, radius-server host, Configures
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 485 highlights
password-attributes Configures rules for password entries. Syntax Parameters password-attributes {[min-length number] [character-restriction {[upper number] [lower number] [numeric number] [special-char number]}} • min-length number - (Optional) Sets the minimum number of required alphanumeric characters (6 to 32; default 9). • character-restriction: - upper number - (Optional) Sets the minimum number of uppercase characters required (0 to 31; default 0). - lower number - (Optional) Sets the minimum number of lowercase characters required (0 to 31; default 0) - numeric number - (Optional) Sets the minimum number of numeric characters required (0 to 31; default 0) - special-char number - (Optional) Sets the minimum number of special characters required (0 to 31; default 0). Default • Minimum length: 9 characters • Uppercase characters: 0 • Lowercase characters: 0 • Numeric characters: 0 • Special characters: 0 Command Mode Usage Information EXEC • By default, the password you configure with the username password command must be at least nine alphanumeric characters. • Use the password-attributes command to increase password strength. When you enter the command, at least one parameter is required. When you enter the character-restriction parameter, at least one option is required. Example OS10(config)# password-attributes min-length 6 character-restriction upper 2 lower 2 numeric 2 Supported Releases 10.4.0E(R1) or later radius-server host Configures a RADIUS authentication server. Syntax Parameters radius-server host {hostname | ip-address} [auth-port port-number | key authentication-key] • hostname - Enter the host name of the RADIUS server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server. • auth-port port-number - (Optional) Enter the UDP port number used on the server for authentication (0 to 65535, default 1812) System management 485