Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 127

Syntax Parameters Command Mode Usage Information Example show unit-provision None EXEC If the Fabric Switching Engine is in Full Switch mode, you must manually configure the unit ID of an attached Fabric Expander (see Virtual ports). Use the show unit-provision command to display the assigned and unassigned unit IDs, and service tag (provision name) values. Use the unit-provision command to configure the Fabric Expander with an unassigned unit ID and provision name. OS10# show unit-provision Node ID | Unit ID | Provision Name | Discovered Name | State | 1 | 71 | | | | 1 | 72 | | | | 1 | 73 | | | | 1 | 74 | | | | 1 | 75 | | | | 1 | 76 | | | | 1 | 77 | | | | 1 | 78 | 403RPK2 | 403RPK2 | up | 1 | 79 | | | | 1 | 80 | | | | 1 | 81 | | | | 1 | 82 | | | | Supported Releases 10.4.0E(R3S) or later show vlan Displays the current VLAN configuration. Syntax show vlan [vlan-id] Parameters vlan-id - (Optional) Enter a VLAN ID (1 to 4093). Default Not configured Command Mode EXEC Usage Information None Example OS10# show vlan Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs Q: A - Access (Untagged), T - Tagged NUM Status Description Q Ports 1 down Supported Releases 10.2.0E or later shutdown Disables an interface. Syntax shutdown Parameters None Default Disabled Interfaces 127