Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 144

Supported Releases 10.3.1E or later fcoe max-sessions-per-enodemac Configures the maximum number of sessions allowed for an ENode. Syntax fcoe max-sessions-per-enodemac max-session-number Parameters max-session-number - Enter the maximum number of sessions to be allowed, ranging from 1 to 64. Defaults 32 Command Mode CONFIGURATION Usage Information The no version of this command resets the number of sessions to the default value. Example OS10(config)# fcoe max-sessions-per-enodemac 64 Supported Releases 10.4.0E(R1) or later feature fc Enables the F_Port globally. Syntax feature fc domain-id domain-id Parameters domain-id - Enter the domain ID of the F_Port, from 1 to 239. Defaults Disabled Command Mode CONFIGURATION Usage Information The no version of this command disables the F_Port. You can disable the F_Port only when vfabric and zoning configurations are not available. Before disabling the F_Port, remove the vfabric and zoning configurations. Example OS10(config)# feature fc domain-id 100 Supported Releases 10.3.1E or later feature fc npg Enables the NPG mode globally. Syntax Parameters Defaults Command Mode Usage Information feature fc npg None Disabled CONFIGURATION The no version of this command disables the NPG mode. You can enable only any one of the following at a time: F_Port, FIP snooping bridge, or NPG. 144 Fibre channel