Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 491

snmp-server community Configures a new community string access. The management station is a member of the same community as the SNMP agent. Syntax Parameters snmp-server community community-name {ro | rw} • community-name - Enter a text string to act as an SNMP password (up to 20 characters). • ro - Enter to set read-only permission. • rw - Enter to set read and write permission. Default Command Mode Usage Information Example Not configured CONFIGURATION The community-name parameter indexes this command. If you do not configure this command, you cannot query SNMP data. The no version of this command removes access to a community. OS10(config)# snmp-server community public ro Supported Releases 10.2.0E or later snmp-server contact Configures contact information for troubleshooting this SNMP node. Syntax snmp-server contact text Parameters text - Enter an alphanumeric text string (up to 55 characters). Default Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes the SNMP server contact information. Example OS10(config)# snmp-server contact administrator Supported Releases 10.2.0E or later snmp-server host vrf Configures a host to receive SNMP traps for the management VRF instance. Syntax snmp-server host {hostname | ipv4-address | ipv6-address} vrf management Parameters hostname | ipv4-address | ipv6-address - Enter either the name or IPv4/IPv6 address of the host. Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command disables the host from receiving the SNMP traps. Example OS10(config)# snmp-server host 1.1.1.1 vrf management Supported Releases 10.4.0E(R1) or later System management 491