Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 607

random-detect weight Configures the exponential weight value used to calculate the average queue depth for the WRED profile. Syntax random-detect weight weight-value Parameters weight-value - Enter a value for the weight (1 to 15). Default Not configured Command Mode WRED CONFIGURATION Usage Information The no version of this command removes the weight factor from the WRED profile. Example OS10(config)# wred test_wred OS10(config-wred)# random-detect weight 10 Supported Releases 10.4.0E(R1) or later service-policy Configures the input and output service policies. Syntax Parameters service-policy {input | output} [type {qos | queuing | network-qos}] policymap-name • input - Enter to assign a QoS policy to the interface input. • output - Enter to assign a QoS policy to the interface output. • qos - Enter to assign a qos type policy-map. • queuing - Enter to assign the queuing type policy-map. • network-qos - Enter to assign the network-qos type policy-map. • policy-map-name - Enter the policy-map name (up to 32 characters). Default Command Mode Usage Information Example Not configured INTERFACE Attach only one policy-map to the interface input and output for each qos and queuing policy-map type. You can attach four service-policies to the system QoS - one each for qos, queueing, and network-qos type policymaps. When you configure service policies at the interface-level and system-level, the interface-level policy takes precedence over the system-level policy. OS10(conf-if-eth1/1/7)# service-policy input type qos p1 Supported Releases 10.2.0E or later set cos Sets a cost of service (CoS) value to mark L2 802.1p (dot1p) packets. Syntax set cos cos-value Quality of service 607