Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 585
Mark Traffic, Color traffic, Color
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 585 highlights
Peak rate is the maximum rate for traffic arriving or leaving an interface under normal traffic conditions. Peak burst size indicates the maximum size of unused peak bandwidth that is aggregated. This aggregated bandwidth enables brief durations of burst traffic that exceeds the peak rate. Configure Interface rate policing 1 Create a QoS type empty class-map to match all the traffic OS10(config)# class-map cmap-all-traffic 2 Create a QoS type policy-map to define a policer OS10(config)# policy-map interface-policer OS10(config-pmap-qos)# class cmap-all-traffic OS10(config-pmap-c-qos)#police cir 4000 pir 6000 Configure flow rate policing 1 Create a QoS type class-map to match the traffic flow OS10(config)# class-map cmap-cos3 OS10(config-cmap-qos)# match cos 3 2 Create a QoS type policy-map to define a policer and assign a traffic class ID for the CoS flow OS10(config)# policy-map flow-policer OS10(config-pmap-qos)# class cmap-cos3 OS10(config-pmap-c-qos)# set qos-group 3 OS10(config-pmap-c-qos)#police cir 4000 pir 6000 Mark Traffic You can select a flow and mark with a traffic class ID. The traffic flow is identified by the traffic class ID when the traffic reaches egress for queue scheduling. Mark traffic 1 Create a QoS type class-map to match the traffic flow OS10(config)# class-map cmap-cos3 OS10(config-cmap-qos)# match cos 3 2 Create a QoS type policy-map to mark with a traffic class ID and assign it for the CoS flow. OS10(config)# policy-map cos3-TC3 OS10(config-pmap-qos)# class cmap-cos3 OS10(config-pmap-c-qos)# set qos-group 3 Color traffic You can select a traffic flow and mark it with a color. You can color the traffic flow based on: • Metering. See Policing traffic. • Default trust. See Trust based classification. • DSCP , ECN capable traffic (ECT), or non-ECT. Color traffic based on DSCP, ECT, or non-ECT 1 Create a QoS type class-map to match the traffic flow. OS10(config)# class-map cmap-dscp-3-ect OS10(config-cmap-qos)# match ip dscp 3 ecn 1 2 Create a QoS type policy-map to color the traffic flow. OS10(config)# policy-map ect-color OS10(config-pmap-qos)# class cmap-dscp-3-ect Quality of service 585