Epson AcuLaser CX11NF Basics - Page 101
Status and Error Messages, B&W Start, Color Start
View all Epson AcuLaser CX11NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Message Action Offline The CX11N is not ready to print. Press the x B&W Start or x Color Start button. Optional RAM error Turn off the CX11N, check if the optional memory is installed correctly, and turn it on again. If the error occurs again, contact Epson as described on page 128. Paper Out source size There is no paper in the specified paper source. Load paper of the size indicated into the paper source. Release Carriage Lock An error occurred when you moved the transportation lock to the locked position. To clear the error message, move the transportation lock to the unlocked position. Then press the x B&W Start or x Color Start button to restart the incomplete scanning job. Replace Toner C/M/Y/K The indicated toner cartridge is empty. Replace the cartridge with a new one. See page 83 for instructions. Scanner ADF error You turned on the CX11NF with the ADF installed. Turn off the CX11NF, install the ADF, and turn it on again. If the error occurs again, contact Epson as described on page 128. Scanner Cover Open The ADF cover is open. Close the ADF cover. Scanner error An internal scanner error occurred. Turn off the CX11N, wait several minutes, then turn it on again. If the error occurs again, contact Epson as described on page 128. Sleep mode Send a print job to the CX11N or press a mode button to exit sleep mode. Status and Error Messages 101