Epson AcuLaser CX11NF Basics - Page 133
Ozone Safety Information, Internal Laser Radiation Label, CDRH Regulations Label, Ozone Emissions
View all Epson AcuLaser CX11NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Internal Laser Radiation Label Max. Average Radiation Power: 5 mW at laser aperture Wavelength: 770 to 795 nm This is a Class III b Laser Diode Assembly that has an invisible laser beam. The printer head unit is NOT A SERVICE ITEM, therefore, the printer head unit should not be opened under any circumstances. An additional laser warning label is affixed to the inside of the printer. CDRH Regulations Label The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. Ozone Safety Information Ozone Emissions Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced only when the CX11N is printing. Ozone Exposure Limit The recommended exposure limit for ozone is 0.1 parts per million (ppm) expressed as an average time-weighted concentration over an eight (8) hour period. The Epson CX11N laser printer generates less than 0.1 ppm for eight (8) hours of continuous printing. Important Safety Instructions 133