Epson AcuLaser CX11NF Basics - Page 15

Placing Originals on the Document Table, shown - cleaning

Get Epson AcuLaser CX11NF PDF manuals and user guides View all Epson AcuLaser CX11NF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Placing Originals on the Document Table Before scanning or copying, make sure the transportation lock on the left side of the document table is set to the unlock position. Always keep the document table clean. 1. Open the document cover and place your original face-down on the glass as shown, in the upper left corner. Move your original about 0.06 in. (1.5 mm) away from the top and left edges so all of it will be scanned. If you plan to scan multiple photographs, position each one at least 0.8 in. apart from the others. Note: The area with a width of maximum 0.06 in. from the horizontal edge and 0.06 in. from the vertical edge is not scanned. Caution: Do not place heavy objects on the document table or press the glass surface with too much force. 2. Close the document cover gently so that your original does not move. Note: Do not leave photographs on the document table for an extended period of time as they may stick to the glass. Placing Originals for Copying and Scanning 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Placing Originals for Copying and Scanning
15
Placing Originals on the Document Table
Before scanning or copying, make sure the transportation lock on the left side of the
document table is set to the
unlock position. Always keep the document table
clean.
1.
Open the document cover and place your original face-down on the glass as
shown, in the upper left corner. Move your original about 0.06 in. (1.5 mm) away
from the top and left edges so all of it will be scanned.
If you plan to scan multiple photographs, position each one at least 0.8 in. apart
from the others.
Note:
The area with a width of maximum 0.06 in. from the horizontal edge and 0.06 in.
from the vertical edge is not scanned.
Caution:
Do not place heavy objects on the document table or press the glass surface with
too much force.
2.
Close the document cover gently so that your original does not move.
Note:
Do not leave photographs on the document table for an extended period of time
as they may stick to the glass.