Epson AcuLaser CX11NF Basics - Page 66

The following table shows the settings and options for each scan mode. Scan modes Automatic scan Manual scan Available settings File Format File Format Paper Size Items PDF, TIFF, JPG PDF, TIFF, JPG A4, B5, Letter, Legal Scanning Follow these steps to scan: 1. Connect the CX11N to your computer with a USB cable or a network cable as described in your Start Here sheet. 2. Turn on the CX11N. Place your originals on the document table (see page 15) or in the Auto Document Feeder (CX11NF only; see page 17). Caution: Make sure the transportation lock on the left side of the document table is set in the unlock position. 3. Press the Scan button. 4. Press the u or d button to select either Local PC or Network PC, then press the r button. When you select Local PC, you see a message on your computer screen. Select your scanning program, scan your document, and close your scanning program. The CX11N returns to the Print mode. When you select Network PC, the network computer name appears in the LCD screen. Press the u or d button to select your network computer, and then press the r button. 5. Press the l or r button to select a file format. 6. Press the x B&W Start or x Color Start button on the control panel. EPSON Scan starts scanning. When the scanning is complete, remove your originals from the document table or the Auto Document Feeder. If you need to cancel scanning, press the y Cancel button. 66 Scanning