HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4476 - Page 115
Table 5-2., Problems Loading and Booting the Operating System
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Table 5-2. Problems Loading and Booting the Operating System Problem Solution The power LED is lit, and text appears on the screen, but more than two minutes have passed with no sign of system activity. Make sure that all SCSI devices are set to the proper SCSI ID. (See Appendix C for default SCSI ID settings.) Check that all SCSI devices are correctly cabled. Check that the SCSI bus is correctly terminated. (See Appendix C for information on SCSI cabling and termination.) The system stops or hangs while booting. Follow the instructions in "Dealing With a Boot Failure," later in this chapter. If problems persist, contact your system administrator or call your designated service representative. 6-4
6-4
Table 5–2.
Problems Loading and Booting the Operating System
Problem
Solution
The power LED is
lit, and text appears
on the screen, but
more than two min-
utes have passed
with no sign of
system activity.
The system stops or
hangs while booting.
Make sure that all SCSI devices are set
to the proper SCSI ID. (See Appendix
C for default SCSI ID settings.)
Check that all SCSI devices are cor-
rectly cabled. Check that the SCSI bus
is correctly terminated. (See Appendix
C for information on SCSI cabling and
termination.)
Follow the instructions in “Dealing
With a Boot Failure,
”
later in this
chapter.
If problems persist, contact your system administrator or call
your designated service representative.