HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4476 - Page 130
Number 1 Posi-drive driver
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
This appendix describes the procedures to change your workstation's hardware configuration. The instructions in this appendix assume you are using the HP-UX version 9.05 or later operating system with the HP VUE version 3.0 interface. CAUTION: Always wear a properly grounded wrist strap when reconfiguring your workstation. Use the following tools to remove or replace hardware parts when changing your configuration: • Light-duty flat blade screwdriver with 150 mm (6 in.) blade • Number 1 Posi-drive driver • Needlenose pliers Also, read the ESD Precautions in Appendix A of this guide. B-2
B-2
This appendix describes the procedures to change your workstation’s
hardware configuration.
The instructions in this appendix assume you are using the HP-UX
version 9.05 or later operating system with the HP VUE version 3.0
interface.
CAUTION:
Always wear a properly grounded wrist strap
when reconfiguring your workstation.
Use the following tools to remove or replace hardware parts when
changing your configuration:
•
Light-duty flat blade screwdriver with 150 mm (6 in.) blade
•
Number 1 Posi-drive driver
•
Needlenose pliers
Also, read the ESD Precautions in Appendix A of this guide.