HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4476 - Page 80
Reading the Busy Light
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Reading the Busy Light The CD-ROM busy light shows the status of the drive during the self test and during activity with the host system. The CD-ROM drive performs the self test when one of the following happens: • You load a disc and close the Disc Tray. • You turn on the workstation with a disc already loaded in the CD-ROM drive. For the self test, the busy light operates in the following sequence: 1. Light On - The busy light goes on when the disc loads into the drive. 2. Light Flashing - The light flashes six times while a read test is performed on the disc. 3. Light Off - The light goes off when the self test is complete. The busy light stays on after the self test when one of the following conditions exist: • A defective disc • A disc insertion error (for example, an upside-down disc) • No disc present The busy light goes off when one of the following conditions exist: • A CD-ROM drive power failure exists. • The drive is idle on the SCSI bus. The busy light flashes during normal activity with the system. 3-21