HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4476 - Page 71
utility lists all of the SCSI I/O
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Terminal Control A terminal window opens. 2. Move the mouse cursor into the terminal window and click the left mouse button. 3. If you are using HP-UX 9.05, enter the following at the prompt: /etc/ioscan -d scsi Enter After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. If there is a SCSI CD-ROM drive in the list, that listing appears similar to the following: H/W Path Description Status 2.0.1.2.0 cd-rom_drive ok(nnnnnnnn) If you are using HP-UX 10.0 or later, enter the following at the prompt: /usr/sbin/ioscan -d sdisk Enter 3-12
3-12
Terminal Control
A terminal window opens.
2.
Move the mouse cursor into the terminal window and click the
left mouse button.
3.
If you are using HP-UX 9.05, enter the following at the prompt:
/etc/ioscan –d scsi
Enter
After a few moments the
ioscan
utility lists all of the SCSI I/O
devices it could find. If there is a SCSI CD-ROM drive in the
list, that listing appears similar to the following:
H/W Path
Description
Status
====================================
2.0.1.2.0
cd-rom_drive
ok(nnnnnnnn)
If you are using HP-UX 10.0 or later, enter the following at the
prompt:
/usr/sbin/ioscan –d sdisk
Enter