HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4476 - Page 179

Slot Numbers on Board Bottom of EISA Assembly Slot 2 Slot 1 Slot 0 GSC Slots Slot 4 Slot 3 Slot 2 Slot 1 EISA Slots Figure A-31. EISA/GSC Slots from Inside the EISA Assembly Physical slot 0 is always reserved for graphics cards only. graphics0 Graphics device in slot 0. If using a Dual Graphics Card, this is the port to the right on the card when facing the back of the workstation. graphics1 Graphics device in slot 1. If using a Dual Graphics Card, this is the port to the right on the card when facing the back of the workstation. graphics2 Graphics device in slot 2. If there is a Dual Graphics Card in slot 1, this is the port to the left on the card when facing the back of the workstation. graphics3 This is a logical slot, and can only be reached by using the left port of a Dual Graphics Card in physical slot 0. NOTICE: We do not recommend using a Dual Graphics Card in slot 2, other than the CRX/HCRX. If running 9.05, you can only use a maximum of 2 graphics cards, with the exception of using the dual graphics card. If using the dual graphics card, it must be the only card in the system and be physically located in slot 0. B-51