HP t310 PCoIP Administrator's Guide - Page 39
Initial Setup Client, Table 4-1: Audio Parameters, Parameter, Description, Audio
View all HP t310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PCoIP Administrator's Guide Figure 4-2: Initial Setup Page (Client) Table 4-1: Audio Parameters For details on configuring the full set of Audio parameters, see section 5.2. Parameter Description Enable HD Audio Enables audio support on the host or client. Enable Microsoft® Windows Vista® 64-bit Mode Enables 64-bit mode on the host. This mode should only be used for Windows Vista 64-bit and Windows 7® 64-bit versions to ensure audio works correctly. Note: This option is only available on the host. It does not appear on the client. Note: Enabling 64-bit mode is not required for Linux, Windows 7® 32-bit, Windows Vista 32-bit, or Windows XP (32-bit or 64-bit). Enable Audio Line In Enable: Use the line-in connector found on the client. Disable: Use the line-in connector as a microphone input. TER0606004 Issue 16 39